Banner Engineering SGS Safety Grid Systems

Banner’s next generation of safety grids is now available. SGS Safety Grid Systems cost less than EZ-SCREEN® Grid Systems, offer more features and capabilities, are available in a wider range of models, and are certified for use in North America and the European Union. These Type 4 safety devices use 2, 3, or 4 beams to detect a body or torso entering a hazardous area and are NOT intended for hand or finger detection. 


SGS Safety Grid Systems are available with or without integral muting. Emitter/Receiver models are capable of safeguarding over very long distances. Active/Passive models are easy to deploy and offer additional cost savings. 


  • Cost-Effective Price Point: SGS Grid Systems cost approximately 30% less than EZ-SCREEN Grid Systems and are priced competitively with similar grid systems from other manufacturers.
  • Integral Muting: Muting sensors can be directly connected to models featuring integral muting, eliminating the expense of adding an external module or controller to enable muting.
  • Muting Arm Kits: Available in four configurations with pre-mounted hardware and Q20 retroreflective sensors and reflectors, muting arm kits make it easy to add muting capabilities to any application
  • Reduced Wiring: Active/Passive systems consist of a mirror assembly and an active transceiver that houses both the emitter and receiver: only one side of the deployment requires power and wiring, simplifying installation and reducing costs.

Banner Engineering SGS Safety Grid Systems Press Release

Banner Engineering Technical Datasheets